2024
Application of permanent magnet energy-saving motor in papermaking
(1) Upgrade the 10 module to version 2.0; (2) Application of permanent magnet energy-saving motor in papermaking;
2023
Breakthrough in PLC project initiation and research and development
(1) Breakthrough in PLC project approval and research and development (2) Application of urban smart water management system; (3) RTU in extending petroleum applications
2022
Newly established Environmental Protection Division and Military Industry Division
New environmental protection division and military division were established and have gained a firm foothold in the market; the first batch of smart manhole cover monitoring sensors was successfully developed and entered the application deployment stage. The development of the PLC master control system was started
2021
The first batch of 300 sets of intelligent RTU and intelligent diagnostic products were applied in Changqing Petroleum Group
Industrial data acquisition (A1, AO, DI, DO) and communication (Profinet) products were successfully developed and put into use. The first batch of 300 sets of intelligent RTU and intelligent diagnosis products were used in Changqing Petroleum Group.
Started QCS 2.0 product digital R&D and moved into the new office
2020
Intelligent RTU was successfully developed and successfully tested in Changqing Petroleum Group
Industrial data acquisition (AI, AO, DI, DO) and communication (digital production plant and comprehensive scientific research office building started construction) Intelligent RTU was successfully developed and successfully tested in Changqing Petroleum Group High-speed ultra-wide paper online intelligent detection system key technology research Suzhou International Paper Industry Exhibition released factory digital system-Zishan System
2019
X-ray sensor developed successfully and put on the market
X-ray sensors were successfully developed and put on the market. The "Multi-wavelength Infrared Component Detection System" was recognized as the first set of products in Sichuan Province. The Ministry of Industry and Information Technology awarded the title of "2019 Green System Solution Supplier". The first batch of "Mianyang Intelligent Manufacturing System Solution Supplier" was recognized in Mianyang. The intelligent RTU product R&D project was approved.
2018
Established overseas business department, overseas orders exceeded 30 million yuan
Established overseas business department, overseas orders exceeded 30 million yuan, established branch in Vietnam for the first time
2017
The introduction of private capital and successful mixed ownership reform have injected new vitality into the company's development
The company introduced private capital and successfully carried out mixed ownership reform, injecting new vitality into the company's development
2016
Gaoda reflective multi-wavelength infrared component sensor developed successfully
The Gaoda intelligent light scanning frame was successfully developed; the Gaoda reflective multi-wavelength infrared component sensor was successfully developed
2015
The first intelligent density gradient analyzer was successfully developed
The domestic papermaking industry first used Siemens AS410 series main controller in a large DCS system and achieved success; the company's improved microwave moisture sensor was successfully upgraded; the company's first intelligent density gradient analyzer was successfully developed
2014
The independently developed green and environmentally friendly multi-wavelength infrared quantitative moisture detection (QCS) system was successfully put into operation
The independently developed green and environmentally friendly multi-wavelength infrared quantitative moisture detection (QCS) system with independent intellectual property rights was successfully developed and put into operation
2013
The first machine in the domestic papermaking industry to adopt Siemens series product design and was successfully put into operation
The first transmission system design using Siemens G120 series products in the domestic papermaking industry was completed and successfully put into operation
2012
Signed a 50,000 ton/year bamboo pulp project
Successfully signed the 50,000 ton/year bamboo pulp washing and bleaching DCS control system project
2011
The "High-pressure water needle roll changing system" is promoted and applied in paper mills.
The "High-pressure water needle roll changing system" was promoted and applied in paper mills, and the project was patented.
2010
The company's annual sales reached 120 million yuan
The company's annual sales reached 120 million yuan
2009
"The company becomes Siemens global partner
"The company has become Siemens' global partner "Solution partner" Surface defect detection system" has been successfully applied to non-woven fabric production and film production
2008
Recognized as a provincial enterprise technology center by the Sichuan Provincial People's Government
The company's technology center was recognized as a provincial enterprise technology center by the Sichuan Provincial People's Government. It developed a "surface defect detection" system and applied it to paper appearance defect detection. The "adjustable steam ejector system" was supported by the national key military-to-civilian project.
2007
The company's business entered the cement industry
The company's business entered the cement industry, involving kiln master transmission DCS, medium and low voltage frequency conversion soft start, and passed ISO9001:2000 quality system certification
2005
Recognized as a municipal enterprise technology center by the Mianyang Municipal People's Government
The company's technology center was recognized as a municipal enterprise technology center by the Mianyang Municipal People's Government. The "Quantitative Moisture Control System" was successfully applied to film thickness measurement. The "Ash Sensor" and "Thickness Sensor" were developed to match the "Quantitative Moisture Control System (QCS)".
2004
Established overseas business department and entered the international market
The company established an overseas business department and its products successfully entered the international market
2003
The Institute of Computer Applications of the China Academy of Engineering Physics and the employees of the Mianyang "Two Funds Management Center" jointly invested to establish Sichuan Gaoda Technology Co., Ltd.
The company was restructured, and Sichuan Gaoda Technology Co., Ltd. was established with the joint investment of the Computer Applications Institute of China Academy of Engineering Physics and the employees of Mianyang "Two Funds Management Center" with a registered capital of 12 million yuan. The company's business entered the environmental protection industry, involving automatic control of solid waste treatment, sewage treatment, etc.
2002
Recognized as a key new product by the state
"Quantitative Moisture Control System (QCS)" was recognized as the National Key New Product of 2002
2001
"Heat pump" system successfully applied in chemical industry
The process control system based on PCS7 has been successfully applied in the pulp and paper industry. The "heat pump" system has been successfully applied in the chemical industry.
2000
Launched "Paper Machine Drive Control System"
The company established the "Electrical and Drive Department" and launched the "Paper Machine Drive Control System", "Rewinder Control System", "MCS Control System" and developed the "Quantitative Moisture Control System (QCS)", which was supported by the Military-to-Civilian and National Science and Technology Innovation Fund. The project was granted two patents.
1999
Obtained two patent authorizations
Launched the "Multi-stage Steam Control System for Paper Machine Drying Section" energy-saving product "Heat Pump" which was successfully applied in the pulp and paper industry, and the project obtained two patent authorizations
1998
Launched the "Automatic Pulping Control System"
Launched the "automatic beating control system" and the "automatic auxiliary material adding system"
1995
"Received support from the National Planning Commission for major military-to-civilian projects
The papermaking continuous pulp automatic control system "received the support of the National Planning Commission's major military-to-civilian project and successfully launched the "pulp concentration flow control system", "pressure control system" and "steam metering system" on the market.
1992
Company Establishment
The national invention patent "Pulp Concentration Controller" is promoted and applied in the pulp and paper industry
1995年
“获得国家计委军转民重大项目支持
造纸连续配浆自动控制系统“获得国家计委军转民重大项目支持，并成功推向市场推出“纸浆浓度流量控制系统”“压力控制系统” “蒸汽计量系统”
