▼ Product Overview
▼ Technical Parameters
| Dimensions |
| Diaphragm flange without capillary connection |
Diaphragm flange with capillary connection
| Selection Table | ||||
| project |
Specification code | illustrate | ||
|
Product Model |
EB3351T-G | |||
|
Sensor range |
3 | 0～40kPa | ||
| 4 | 0～250kPa | |||
| 5 | 0～3MPa | |||
| 6 | 0～10MPa | |||
| Output signal | E | 4～20mA | ||
| S | 4～20mA, HART protocol digital communication | |||
| M | Modbus RS485 | |||
| Electrical interface | 1 | M20*1.5 internal thread | ||
| 2 | NPT1/2 internal thread | |||
| 3 | G1/2 internal thread | |||
| Display Module | M5 | Intelligent LCD display | ||
| Diaphragm filling fluid | N | Normal temperature type (normal temperature silicone oil, -35℃～150℃) | ||
| F | High temperature type (high temperature silicone oil, 15℃～250℃) | |||
| S | Oil-free type (fluorine oil, -45℃～205℃) | |||
| Z | Hygienic type (vegetable oil, 10℃～80℃) | |||
| Flange Style | 1 | One-piece flange | ||
| 3 | Clamp | |||
| Flange standard; pressure rating | H3 | HG/T20592;PN10/16 | ||
| H5 | HG/T20592;PN25/40 | |||
| H7 | HG/T20592;PN63 | |||
| H8 | G/T20592;PN100 | |||
| A1 | JIS B2220;10K | |||
| A2 | JIS B2220; 20K | |||
| A4 | JIS B2220; 30K | |||
| J2 | ASME B16.5;150 LB | |||
| J3 | ASME B16.5;300LB | |||
| J5 | ASME B16.5;600LB | |||
| Flange nominal size | T | Specification | ||
| 3 | DN25/1" | |||
| 4 | DN32/1.25" | |||
| 5 | DN40/1.5" | |||
| 6 | DN50/2" | |||
| 7 | DN65/2.5" | |||
| 8 | DN80/3" | |||
| 9 | DN100/4" | |||
| K | φ50.5mm clamp | |||
| L | φ64mm clamp | |||
| Flange sealing surface type | A | RF raised surface (conventional) | ||
| B | FM Concave | |||
| C | M convex | |||
| D | FF plane | |||
| E | RJ ring connection surface | |||
| K | Clamp seal | |||
| Flange material | A | SUS304 | ||
| B | SUS316L | |||
| Diaphragm material | 2 | SUS316L | ||
| 3 | Hastelloy C-276 | |||
| 4 | Monel | |||
| 5 | Tantalum | |||
| 6 | titanium | |||
| Wetted material coating | N | none | ||
| Y | PFA(Teflon) | |||
| G | Gold plating | |||
| Diaphragm protrusion length | 0 | 0 | ||
| 1 | 50mm | |||
| 2 | 100mm | |||
| 3 | 150mm | |||
| 4 | 200mm | |||
| T | Special size | |||
| Capillary length* | Capillary length from 0 to 10m (for example: 3m is represented by 03) | |||
| Additional Options | ||
| project | Code | illustrate |
| Explosion-proof requirements | D | Flameproof type ExdⅡCT6 |
| A | Intrinsically safe ExiaⅡCT6 | |
| Capillary special material | S6 | SUS316L |
| Capillary sheath special material | A | SUS 316 Armor |
| B | SUS304+PVC | |
| C | SUS316+PVC | |
| Bracket material | Z4 | SUS304 |
| Shell material | K4 | SUS304 |
| K6 | SUS316 | |
| Protection level | P7 | IP67 protection |
Note:
1. When the capillary is 0m, no bracket is required.
2. If the capillary length exceeds 10 meters or is not an integer, please consult the manufacturer.
3. Oxygen measurement is limited to fluorine oil filling liquid, fluorine rubber sealing ring, less than 6MP, less than 60℃.
4. If the contact material is tantalum, the contact temperature is -10 to 200°C.
5. If the contact material is Hastelloy, tantalum, or titanium, the filling liquid is high-temperature silicone oil, or the capillary length exceeds 5 meters, the temperature, static pressure, and reaction time will increase.
6. The user must consider the corrosiveness of the material of the liquid contact part and the medium. Inappropriate materials may cause unexpected corrosive medium leakage, causing serious damage to the human body and factory equipment. When selecting the model, please note: if the medium is highly corrosive, such as acid, sulfuric acid, H 2 When using sodium hypochlorite or high temperature steam above 150℃, the current design requirements must be followed.
7. If the above individual parameters do not meet your requirements, please contact the manufacturer.
